Garmin Fishfinder Transducer P319-6G (010-10194-01)


Artikel 7 van 7

Garmin Fishfinder Transducer P319-6G  (010-10194-01)
Garmin Fishfinder Transducer P319-6G  (010-10194-01) - 2



€ 83 75

Aantal

Fishfinder Transducer P319-6G

Levertijd: ± 4-5 werkdagen.

The P319 is a 600W through-hull low-profile depth and temperature transducer with a plastic housing, that operates at 50kHz and 200kHz. It has a fixed (non-retractable) insert. The P319 is designed for installation only in the flat bottom of a boat. It does not have any built-in tilt for deadrise compensation.

P319s are now made as a generic `mix and match` (MM) transducer with a short 2M pigtail ending in an Airmar 5-pin connector. Airmar mix and match 600W adapter cables connect to the pigtail and terminate in a connector that is specific to a brand of sounder or fishfinder. The total cable length with adapter installed is 10 meters. You can replace the adapter cable at a later time if you change your sounder, without having to remove or replace the transducer.

This item consists of the MM transducer plus an adapter cable with a Garmin 6-pin connector as used on many Garmin fishfinders and sounders. It is sold by Garmin as model 010-10194-01.

Product Features

  • Power handling capacity 600W RMS
  • 50kHz/200kHz frequency
  • Usable shaft length 2.18" (55mm) less thickness of hull
  • No deadrise compensation, for flat bottomed sections of the hull
  • Ideal for center-console and trailered boats
  • Hole size 2.00" (51mm)
  • Housing protrudes 0.19" outside hull (5mm)
  • Beam 45 deg at 50 kHz, 12 deg at 200kHz
  • Maximum depth 800-1200 ft @ 50kHz (235-353 meters)
  • Maximum depth 400-700 ft @ 200kHz (118-206 meters)


Gerelateerde Objecten



(inclusief 19% BTW)